DSpace university logo mark
Japanese | English 

NAOSITE : Nagasaki University's Academic Output SITE > 130 病院 > 130 学術雑誌論文 >

Effect of single-liquid priming agents on adhesive bonding to aluminum oxide of a methacrylic resin.

ファイル 記述 サイズフォーマット
DMJ26_642.pdf116.79 kBAdobe PDF本文ファイル

タイトル: Effect of single-liquid priming agents on adhesive bonding to aluminum oxide of a methacrylic resin.
著者: Yamada, Kazuya / Koizumi, Hiroyasu / Kawamoto, Yoshikazu / Ishikawa, Yumi / Matsumura, Hideo / Tanoue, Naomi
発行日: 2007年 9月
出版者: The Japanese Society for Dental Materials and Devices
引用: Dental materials journal, 26(5), pp.642-646; 2007
抄録: The purpose of this study was to evaluate the effects of acidic primers on adhesive bonding to sintered aluminum oxide (alumina). Alumina disks were primed with one of the following materials: Acryl Bond, All Bond 2 Primer B, Alloy Primer, Estenia Opaque Primer, Eye Sight Opaque Primer, M.L. Primer, MR. Bond, and Super-Bond Liquid. Specimens were then bonded with an acrylic resin initiated with partially oxidized tri-n-butylborane (TBBO), and bond strengths were determined. Unprimed specimen was employed as the control. Average bond strength before thermocycling ranged from 20.5 to 41.9 MPa, whereas post-thermocycling bond strength ranged from 0.0 to 40.0 MPa. Of the eight primers, Estenia Opaque Primer and Alloy Primer showed better adhesive performance than the other materials. It could thus be concluded that either Estenia Opaque Primer or Alloy Primer--which contained an adhesive monomer, 10-methacryloyloxydecyl dihydrogen phosphate (MDP)--was recommended for bonding alumina with TBBO-initiated resin.
キーワード: Alumina / Partially oxidized tri-n-butylborane / Primer
URI: http://hdl.handle.net/10069/22516
ISSN: 02874547
DOI: 10.4012/dmj.26.642
PubMed ID: 18203462
資料タイプ: Journal Article
原稿種類: publisher
出現コレクション:130 学術雑誌論文

引用URI : http://hdl.handle.net/10069/22516



Valid XHTML 1.0! Copyright © 2006-2015 長崎大学附属図書館 - お問い合わせ Powerd by DSpace