DSpace university logo mark
Japanese | English 

NAOSITE : Nagasaki University's Academic Output SITE > 060 工学部・工学研究科 > 060 学術雑誌論文 >

Fe-Pt Thick Film Magnets Prepared by High-Speed PLD Method

ファイル 記述 サイズフォーマット
ITM44_4229.pdf65.04 kBAdobe PDF本文ファイル

タイトル: Fe-Pt Thick Film Magnets Prepared by High-Speed PLD Method
著者: Nakano, Masaki / Shibata, S. / Yanai, Takeshi / Fukunaga, Hirotoshi
発行日: 2008年11月
出版者: Institute of Electrical and Electronics Engineers
引用: IEEE Transactions on Magnetics, 44(11), pp.4229-4231; 2008
抄録: Fe 50 Pt 50 film magnets were prepared by the pulsed laser deposition (PLD) method under the high deposition rate. Increase in a laser power enabled us to increase the deposition rate and obtain Fe-Pt thick films with good mechanical properties. The maximum deposition rate of 50 μm/h can be achieved at the laser power of 9 W. Although a substrate heating system was not comprised in our PLD apparatus, the substrate temperature showed higher than 673 K as the laser power exceeded 5 W. In the as-deposited films prepared under the laser power ranging between 5 and 9 W, order-disorder transformation occurred and the values of coercivity of the samples became higher than 400 kA/m.
キーワード: Fe-Pt thick film magnets / Order-disorder transformation / Pulsed laser deposition (PLD) method
URI: http://hdl.handle.net/10069/23904
ISSN: 00189464
DOI: 10.1109/TMAG.2008.2001883
権利: © 2008 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
資料タイプ: Journal Article
原稿種類: publisher
出現コレクション:060 学術雑誌論文

引用URI : http://hdl.handle.net/10069/23904



Valid XHTML 1.0! Copyright © 2006-2015 長崎大学附属図書館 - お問い合わせ Powerd by DSpace