DSpace university logo mark
Japanese | English 

NAOSITE : Nagasaki University's Academic Output SITE > 010 教育学部・教育学研究科 > 010 紀要 > 長崎大学教育学部紀要. 自然科学 > 第64号 >

単板切削現象の変化に及ぼすプレッシャバー-ナイフ-被削材相互の位置関係の影響(解析と実験) (VI) : ローラバーを作用させた単板切削における単板性状の変化に及ぼすローラバーの回転方式, 直径および設定条件の影響

ファイル 記述 サイズフォーマット
KJ00000045811.pdf504.41 kBAdobe PDF本文ファイル

タイトル: 単板切削現象の変化に及ぼすプレッシャバー-ナイフ-被削材相互の位置関係の影響(解析と実験) (VI) : ローラバーを作用させた単板切削における単板性状の変化に及ぼすローラバーの回転方式, 直径および設定条件の影響
その他のタイトル: Effects of Shape and Setting of the Pressure Bar upon the Cutting Phenomena in the Orthogonal Cutting of Veneer (VI) : Effect of Rolling Type, Diameter and Setting Conditions of the Roller Bar upon Veneer Quality in Orthogonal Cutting of Veneer with a Roller Bar
著者: 杉山, 滋
著者(別表記) : Sugiyama, Shigeru
発行日: 2001年 3月28日
引用: 長崎大学教育学部紀要. 教育科学. vol.68, p.69-77; 2005 / 長崎大学教育学部紀要. 自然科学. vol.64, p.41-47; 2001
抄録: In the veneer cutting process, compression and restraint caused by a pressure bar play an important role, but few studies have dealt with their effects upon the cutting phenomena. Therefore, the main purpose of the study reported here was to obtain quantitative information on these aspects. Roller bars with various diameter (D) and of various rolling types were prepared to vary the depth (γ_1) of restraint by interface between the face of the roller bar and the knife rake-face, the action area of restraint, and the degree of friction between the face of the roller bar and the tight side of the veneer. White seraya veneer, 10mm thick, was cut with five rolling types of the roller bars, and the knife check of the loose side, the crack of the tight side and the curvature of the veneer were measured. Based on these measurements, their variations under various experimental conditions were clarified, and characteristics of the veneer cutting with a roller bar were discussed.
URI: http://hdl.handle.net/10069/6093
ISSN: 13451359
資料タイプ: Departmental Bulletin Paper

引用URI : http://hdl.handle.net/10069/6093



Valid XHTML 1.0! Copyright © 2006-2015 長崎大学附属図書館 - お問い合わせ Powerd by DSpace