DSpace university logo mark
Japanese | English 

NAOSITE : Nagasaki University's Academic Output SITE > 010 教育学部・教育学研究科 > 010 紀要 > 長崎大学教育学部紀要. 自然科学 > 第70号 >

木材切削工具の切れ味測定と切れ味評価(XXVII) : 木材切削における工具すくい面の切削応力分布および摩擦係数の変化に及ぼす被削材繊維傾斜角の影響(2)(東 幹夫・尾崎 洋二教授退官記念)

ファイル 記述 サイズフォーマット
KJ00004167725.pdf503.41 kBAdobe PDF本文ファイル

タイトル: 木材切削工具の切れ味測定と切れ味評価(XXVII) : 木材切削における工具すくい面の切削応力分布および摩擦係数の変化に及ぼす被削材繊維傾斜角の影響(2)(東 幹夫・尾崎 洋二教授退官記念)
その他のタイトル: Studies on Quantification of Sensuous Sharpness and Mechanical Sharpness of Wood Cutting Tools. XXVII. : Effects of Workpiece Grain-Angle upon Stress Distribution and Frictional Coefficient on Tool Rake-Face in Wood Cutting (2)
著者: 杉山, 滋
著者(別表記) : Sugiyama, Shigeru
発行日: 2004年 3月26日
引用: 長崎大学教育学部紀要. 自然科学. vol.70, p.37-42; 2004
抄録: In the wood cutting process, it is important to obtain the actual stress distribution over the rake face during cutting and to investigate the changes of the stress distribution and the frictional coefficients depending on the workpiece conditions. In order to obtain quantitative information on them, the basic orthogonal cutting tests of wood were performed at 144.9 mm/min of cutting speed, using the conventional tool and the composite tool. The results obtained are summarized as follows : (1) The distributions of the normal stress (σ) and the frictional stress (τ) over the rake face can be expressed by Eq.(4), and the variations of the values of the exponents and the coefficients used in this equation with grain angle (φ_1) are illustrated in Figs. 4 and 5. (2) On the basis of the experimental results obtained in the wood cutting tests with the conventional tool and the composite tool, the cutting force ratios on the rake face near the tool edge to the total cutting force on the rake face can be calculated from Eq.(5), and these ratios are illustrated in Fig. 7. (3) The frictional coefficients (μ) on the rake face can be expressed by Eq.(7). On the rake face, μ can be considered to be constant, and the variations of μ with φ_1 are illustrated in Fig.8.
URI: http://hdl.handle.net/10069/6133
ISSN: 13451359
資料タイプ: Departmental Bulletin Paper

引用URI : http://hdl.handle.net/10069/6133



Valid XHTML 1.0! Copyright © 2006-2015 長崎大学附属図書館 - お問い合わせ Powerd by DSpace