DSpace university logo mark
Japanese | English 

NAOSITE : Nagasaki University's Academic Output SITE > 060 工学部・工学研究科 > 060 学術雑誌論文 >

遠心羽根車の羽根先端すきまに基づく二次流れ : 続報,二次流れとすべり係数の関係

ファイル 記述 サイズフォーマット
kikaiB55_1917.pdf212.86 kBAdobe PDF本文ファイル

タイトル: 遠心羽根車の羽根先端すきまに基づく二次流れ : 続報,二次流れとすべり係数の関係
その他のタイトル: Secondary Flow due to the Tip Clearance at the Exit of Centrifugal Impellers : 2nd Report, Relationship between secondary flow and slip coefficient
著者: 石田, 正弘 / 妹尾, 泰利 / 植木, 弘信
著者(別表記) : Ishida, Masahiro / Senoo, Yasutoshi / Ueki, Hironobu
発行日: 1989年 7月25日
出版者: 日本機械学会
引用: 日本機械学會論文集. B編 55(515) p.1917-1921, 1989
抄録: The velocity distributions measured at the exit of two different types of unshrouded centrifugal impellers respectively under four different tip clearance conditions were reexamined with respect to the shroud wall surface. By increasing the tip clearance, the hub-to-shroud velocity distribution was hardly changed at the exit of the radial blade impeller, by contrast, the relative flow angle was reduced significantly and monotonously in the backward-leaning blade impeller. The change in input power due to the tip clearance was clearly related to the change of flow pattern at the exit of the impeller due to the secondary flow, which must be induced by the component, normal to the blade, of the shear force to support the fluid in the clearance space against the pressure gradient in the meriodional plane without blades.
キーワード: Fluid Machine / Centrifugal Impeller / Tip Clearance / Leakage / Secondary Flow / Slip Coefficient
URI: http://hdl.handle.net/10069/6736
ISSN: 03875016
資料タイプ: Journal Article
原稿種類: publisher
出現コレクション:060 学術雑誌論文

引用URI : http://hdl.handle.net/10069/6736



Valid XHTML 1.0! Copyright © 2006-2015 長崎大学附属図書館 - お問い合わせ Powerd by DSpace